What Italy requires
Under Article 219(5) of Legislative Decree 152/2006, all packaging must be appropriately labelled to facilitate collection, reuse, recovery and recycling and to inform consumers about the final destination of the packaging. Producers must also indicate the nature of the packaging materials on the basis of Commission Decision 97/129/EC. The obligations apply from 1 January 2023 (Article 219(5.2)). Packaging already placed on the market or labelled by then may be sold until stocks run out.
How to do it is set out in the guidelines on packaging labelling adopted by Ministerial Decree 360 of 28 September 2022, which the generator follows.
Consumer and business packaging
Packaging offered to consumers, empty or filled, must show the material code of Decision 97/129/EC and instructions on how to sort it. The guidelines suggest either “Raccolta” followed by the material family, such as Raccolta carta, or the material family followed by “Raccolta differenziata”, and inviting consumers to check the rules of their municipality: Verifica le disposizioni del tuo Comune.
Packaging that only goes to businesses (B2B), such as transport packaging, must show the material code but can leave out the sorting instructions. For B2B packaging the information may also be given on the transport documents or other documents that accompany the goods.
Packaging with several parts
Every part that the consumer can separate completely by hand, such as a cap or a multipack sleeve, needs its own material code and sorting instructions. Parts that cannot be separated by hand, such as a glued label or a window, follow the main body: the label must show the code of the main body, and the code of the inseparable part may be added but without sorting instructions. If a part has no room for the information, it can be printed on the main body or the outer packaging, listing each part with its code and sorting instructions, which is the table the generator makes.
Composites and the 5 % rule
Packaging made of different materials that cannot be separated by hand is a composite and takes a code from Annex VII of Decision 97/129/EC: C/ plus the abbreviation of the predominant material, then the number, such as C/PAP 84 for a paper, plastic and aluminium carton. If the secondary materials together weigh less than 5 % of the packaging, the guidelines treat it as a single material. The sorting instructions follow the predominant material. For paper-based composites with less than 60 % paper fibre, the guidelines invite companies to suggest unsorted waste, because they cannot be recycled with paper.
Codes the decision does not cover
Decision 97/129/EC only has codes for six plastics. The guidelines use 7 for other polymers and for multilayer plastics, optionally with the abbreviation of UNI EN ISO 1043-1 in front (PA 7, PETG 7) or the layers written as in UNI EN ISO 11469 (>PET+HDPE< 7). They also suggest 42 for metals other than steel and aluminium, GL 73 for glass of another colour and TEX 62 for textiles other than cotton and jute. Compostable plastics have extra labelling rules under Article 182-ter of the same decree, which this generator does not cover.
On the pack, by QR code or online
Instead of printing the information on the packaging, companies may always give it through digital channels such as an app, a QR code or a website, as long as consumers are told clearly how to find the information for that specific packaging. The guidelines mention this in particular for small packaging, packaging in several languages and imported packaging.
What changes in 2028
Under Article 12 of the Packaging and Packaging Waste Regulation (EU) 2025/40, packaging will carry a harmonised EU label from 12 August 2028 or 24 months after the implementing acts enter into force, whichever is later. Decision 97/129/EC is repealed from 12 August 2028, and its content is to be incorporated into the implementing act.
Packaging material codes (Decision 97/129/EC)
Numbers and abbreviations of the identification system for packaging materials, with the official names from the decision. Rows marked as Italian guidelines are not in the decision itself.
| Code | Material | Italian |
|---|---|---|
| Plastics | ||
| PET 1 | Polyethylene terephthalate | Polietilentereftalato |
| HDPE 2 | High density polyethylene | Polietilene ad alta densità |
| PVC 3 | Polyvinyl chloride | Cloruro di polivinile |
| LDPE 4 | Low density polyethylene | Polietilene a bassa densità |
| PP 5 | Polypropylene | Polipropilene |
| PS 6 | Polystyrene | Polistirolo |
| 7 | Other plastics or multilayer plastic (Italian guidelines) | |
| Paper and fibreboard | ||
| PAP 20 | Corrugated fibreboard | Cartone ondulato |
| PAP 21 | Non-corrugated fibreboard | Cartone non ondulato |
| PAP 22 | Paper | Carta |
| Metals | ||
| FE 40 | Steel | Acciaio |
| ALU 41 | Aluminium | Alluminio |
| 42 | Other metals (Italian guidelines) | |
| Wood | ||
| FOR 50 | Wood | Legno |
| FOR 51 | Cork | Sughero |
| Textiles | ||
| TEX 60 | Cotton | Cotone |
| TEX 61 | Jute | Juta |
| TEX 62 | Other textiles (Italian guidelines) | |
| Glass | ||
| GL 70 | Colourless glass | Vetro incolore |
| GL 71 | Green glass | Vetro verde |
| GL 72 | Brown glass | Vetro marrone |
| GL 73 | Glass of another colour (Italian guidelines) | |
| Composites | ||
| C/… 80 | Paper and fibreboard/miscellaneous metals | Carta e cartone/metalli vari |
| C/… 81 | Paper and fibreboard/plastic | Carta e cartone/plastica |
| C/… 82 | Paper and fibreboard/aluminium | Carta e cartone/alluminio |
| C/… 83 | Paper and fibreboard/tinplate | Carta e cartone/latta |
| C/… 84 | Paper and fibreboard/plastic/aluminium | Carta e cartone/plastica/alluminio |
| C/… 85 | Paper and fibreboard/plastic/aluminium/tinplate | Carta e cartone/plastica/alluminio/latta |
| C/… 90 | Plastic/aluminium | Plastica/alluminio |
| C/… 91 | Plastic/tinplate | Plastica/latta |
| C/… 92 | Plastic/miscellaneous metals | Plastica/metalli vari |
| C/… 95 | Glass/plastic | Vetro/plastica |
| C/… 96 | Glass/aluminium | Vetro/alluminio |
| C/… 97 | Glass/tinplate | Vetro/latta |
| C/… 98 | Glass/miscellaneous metals | Vetro/metalli vari |